Halluminations

3-Pack Pumpkin Lid Lights with Remote | 12-Color Jack-O’-Lantern Lights

$29.99 USD

Sale Sold out

Color: Orange

Light Three Pumpkins From Above — And Control Them With One Remote

The Halluminations 3-Pack Pumpkin Lid Lights with Remote gives you three top-mounted pumpkin lights plus one remote that unlocks the full feature set of the included puck lights.

Each Lid Light mounts underneath the pumpkin lid and shines light downward through the carving instead of sitting on the bottom.

That means easier access to the light, less fumbling inside the pumpkin, cleaner-looking carvings, and more usable space for fog, candy, props, scenes, food displays and other creative Halloween effects.

Each puck works on its own with simple push-button control. Use the included remote to unlock 12 colors, lighting effects, timers and brightness control.

Unlock the Full Power of Your Pucks

Each puck gives you simple manual control:

White → Red → Blue → Green → Off

Use the included remote and you unlock much more:

12 preset colors
Slow fade through all 12 colors
Faster color cycling through all 12 colors
30-minute timer
60-minute timer
Brightness up
Brightness down

The pucks give you the basics. The remote unlocks the full experience.

Why Choose the 3-Pack + Remote?

Three Pumpkin Lights. One Remote.

Use one Lid Light in each pumpkin and create a larger coordinated Halloween display without reopening the pumpkins to change the lighting.

Built for Multi-Pumpkin Displays

The 3-pack is ideal for front steps, porch arrangements, entryways, parties and groups of jack-o’-lanterns.

Match Them or Mix Them Up

Use the same color across all three pumpkins for a coordinated look, or create different effects and colors throughout your display.

More Control, Less Fumbling

Use the remote to change colors, adjust brightness, choose lighting effects and set timers without reaching inside the pumpkins.

12-Color Remote-Controlled Pumpkin Lighting

The included remote expands your jack-o’-lantern lights beyond the four basic puck colors.

12 Preset Colors

Choose from 12 different colors to match your carving, porch display or Halloween theme.

Slow Fade Mode

Gradually transition through all 12 colors for a softer, continuously changing effect.

Faster Color Cycle

Cycle through all 12 colors at a quicker pace for a more energetic Halloween display.

30-Minute Timer

Set the pumpkin lights to turn off automatically after 30 minutes.

60-Minute Timer

Choose a longer 60-minute timer when you want your display illuminated longer.

Brightness Control

Increase or decrease brightness directly from the remote without opening the pumpkins.

Manual Control Is Still Built In

The remote is an upgrade, not a requirement for basic operation.

Press any puck directly to cycle through:

White → Red → Blue → Green → Off

Each Lid Light can still be operated independently whenever you want.

Dimensions
Each Lid Light
Diameter: 3.875 in.
Overall Height: 2.25 in.
Exposed Height After Installation: 1.5 in.

What’s Included
3 Halluminations Pumpkin Lid Light Mounts
3 Color-Changing Puck Lights
1 Remote Control
Puck Controls
• White
• Red
• Blue
• Green
• Off

Remote Controls

12 preset colors
Slow fade through all 12 colors
Faster color cycling through all 12 colors
30-minute timer
60-minute timer
Brightness up
Brightness down

3D Printed Product

Each Halluminations Lid Light is individually 3D printed.

Minor layer lines, surface texture, small rough edges or slight cosmetic variations are a normal part of the 3D printing process and do not affect product performance.

Please note: Minor cosmetic variation between the three mounts is normal.

Why Light Your Pumpkin From Above?

Most jack-o’-lantern lights start at the bottom.

The Halluminations Pumpkin Lid Light starts at the top.

That simple change gives you easier access to your light, a cleaner-looking carving, more usable space inside your pumpkin and entirely new ways to create.

Light from above. Do more with your pumpkin.

Easier Access to the Light

Lift the pumpkin lid and the light comes up with it.

There’s no reaching down inside the pumpkin, searching for the puck or fumbling around behind your carving just to turn the light on, change the color or remove it.

No Puck Sitting on the Bottom

Traditional pumpkin lights sit in the base of the jack-o’-lantern where they may be visible through larger carvings.

The Lid Light keeps the light source mounted overhead and out of the way, so the focus stays on your illuminated pumpkin.

Less Fumbling Inside Your Pumpkin

Because the puck is attached underneath the lid, basic light access happens at the top of the pumpkin instead of deep inside it.

Lift the lid. Access the light. Put the lid back.

Keep the Bottom of Your Pumpkin Open

Moving the light overhead frees up valuable space inside your jack-o’-lantern.

Use the bottom for:

Fog effects
Candy displays
Miniature scenes
Props
Food displays
Hanging effects
Open-bottom pumpkin designs
Creative Halloween installations

A Cleaner Look Through the Carving

With no puck sitting directly behind or beneath the carving, you see the illuminated jack-o’-lantern instead of the lighting hardware.

More Flexible Pumpkin Lighting

Because the light is attached to the lid, you don’t have to depend on the pumpkin having a perfectly flat interior surface to keep the puck positioned where you want it.

Not Just a Simple Jack-O'-Lantern Light

Moving the light to the top of the pumpkin opens up possibilities that are difficult or impossible with a traditional bottom-mounted pumpkin light.

Try using your Pumpkin Lid Light for:

Fog-Filled Pumpkins

Keep the bottom clear for fog effects while the light shines through the mist from above.

Candy Displays

Fill the bottom of the pumpkin with candy while keeping the lighting overhead.

Pumpkin Dioramas

Create miniature graveyards, creatures, scenery and detailed displays inside the pumpkin.

Food Displays

Use an open-bottom or large-mouth pumpkin to illuminate cupcakes, appetizers, candy or other Halloween party displays.

Hanging Pumpkins

Create suspended jack-o’-lanterns with the light positioned at the top and the bottom left open.

Projection Effects

Use strategically carved openings to cast light and patterns onto surrounding surfaces.

Color-Changing Carvings

Use white, red, blue or green lighting to give the same carving completely different personalities.

Installation, Cleaning & Removal

How to Install:

1. Twist It Into the Lid
Position the Lid Light against the underside of your carved pumpkin lid and twist it securely into the pumpkin flesh.

2. Choose Your Color
Press the puck light to select white, red, blue or green.

3. Replace the Pumpkin Lid
Put the lid back onto your jack-o’-lantern.

The light now shines downward from the top of the pumpkin through your carving.

Easy Removal:

When Halloween is over — or when you simply want to remove the Lid Light — lift the pumpkin lid and remove the puck light from the mount.

Hold the lid securely and twist the Lid Light in the opposite direction used during installation until the mount releases from the pumpkin.

The top-mounted design also makes removal easier because you can work directly with the lid instead of reaching inside the pumpkin.

Cleaning & Storage:

Cleaning the Mount
Remove any remaining pumpkin flesh or residue from the mount.

Wash the mount with warm water and mild dish soap, then rinse and dry it thoroughly before storage.

Cleaning the Puck Light
Wipe the puck light with a soft, slightly damp cloth.

Do not immerse the electronic puck light in water.
For best results, clean and completely dry the Lid Light before storing it for your next Halloween.

View full details