Halluminations

Pumpkin Puck Light Remote | 12-Color Jack-O’-Lantern Light Controller

$8.99 USD

Sale Sold out

Color: White

Unlock Your Puck’s Potential

Your Halluminations-compatible puck light already gives you simple push-button control for white, red, green, blue and off.

Add the Halluminations Pumpkin Puck Light Remote and unlock the features built into your puck: more colors, brightness control, lighting effects, timers and wireless operation.

Instead of lifting the pumpkin lid every time you want to change the lighting, control your jack-o’-lantern lights from outside the pumpkin.

The puck gives you the basics. The remote unlocks its potential.

Go From 4 Colors to 12

Without a remote, the compatible puck cycles manually through four colors:

White → Red → Green → Blue → Off

With the remote, you can directly access 12 preset rainbow colors plus warm white, giving you far more control over the look of your carved pumpkin.

Match the light to your carving, create coordinated porch displays, or completely change the personality of your jack-o’-lantern without touching the puck.

More Than Just Color

12 Preset Colors

Select from 12 preset colors at the push of a button, plus warm white for a classic pumpkin glow.

Smooth Color-Changing Mode

Use Smooth mode to automatically cycle through the 12 rainbow colors for a continuously changing pumpkin display.

Fade Mode

Use Fade mode for a gradual change in brightness, creating a softer pulsing lighting effect.

Brightness Control

Use the + and – buttons to brighten or dim compatible puck lights without opening your jack-o’-lantern. The compatible puck lights reach up to 40 lumens at maximum brightness.

30-Minute Timer

Set your pumpkin light to shut off automatically after 30 minutes.

60-Minute Timer

Choose the 60-minute timer when you want your display illuminated longer.

Control Your Pumpkin Without Opening It

This is where the remote becomes especially useful with a Halluminations top-mounted pumpkin light.

Once the puck is installed underneath the pumpkin lid, the remote lets you:

Change colors
Adjust brightness
Choose a lighting mode
Set a timer
Turn compatible lights on or off
—all without lifting the lid or reaching inside the pumpkin.

Control Multiple Pumpkin Lights

One compatible remote can operate multiple matching puck lights, making it ideal for multi-pumpkin porch displays, groups of jack-o’-lanterns and Halluminations bundle setups.

The puck manufacturer specifies a wireless range of up to 20 feet and states that one remote can operate up to 50 compatible color puck lights.

That means one remote can become the control center for an entire pumpkin display.

Perfect For

Halluminations Pumpkin Lid Lights

Halluminations Pumpkin Puck Light Mount Kits

Color-changing jack-o’-lantern displays

Multi-pumpkin porch displays

Fog pumpkins

Pumpkin dioramas

Halloween party displays

Coordinated pumpkin lighting

Easy to Use

1. Turn On Your Compatible Puck
Activate the puck light.

2. Replace the Pumpkin Lid
With a Halluminations mount or Lid Light, the puck stays positioned overhead.

3. Use the Remote
Select a color, adjust brightness, choose a lighting mode or set a timer from outside the pumpkin.

Compatible Features

When used with the Halluminations-compatible color-changing puck lights, the remote provides:

12 preset rainbow colors + warm white
Smooth color-cycle mode
Fade mode
Brightness up
Brightness down
30-minute timer
60-minute timer
On / Off control
Up to 20 ft. wireless range

What’s Included
1 Remote Control
The source puck-light system uses a CR2025 battery in the remote, with the battery included in the original remote configuration.
Puck light not included.

Compatibility

This remote is intended for use with the compatible color-changing puck lights sold by Halluminations.

It is not a universal remote for all puck lights. Puck lights from other manufacturers may use different infrared or wireless control systems and may not respond to this remote.

That warning should stay on the page. Otherwise somebody will buy a $6 random puck on Amazon, expect your remote to operate it, and blame Halluminations when it doesn't.

Cleaning & Storage

Wipe the remote with a dry or slightly damp soft cloth.

Do not immerse the remote in water.

Store indoors in a dry location when not in use.

Why Light Your Pumpkin From Above?

Most jack-o’-lantern lights start at the bottom.

Halluminations Pumpkin Lighting Solutions start at the top.

That simple change gives you easier access to your light, a cleaner-looking carving, more usable space inside your pumpkin and entirely new ways to create.

Light from above. Do more with your pumpkin.

Easier Access to the Light

Lift the pumpkin lid and the light comes up with it.

There’s no reaching down inside the pumpkin, searching for the puck or fumbling around behind your carving just to turn the light on, change the color or remove it.

No Puck Sitting on the Bottom

Traditional pumpkin lights sit in the base of the jack-o’-lantern where they may be visible through larger carvings.

The Lid Light or Puck Mount keeps the light source mounted overhead and out of the way, so the focus stays on your illuminated pumpkin.

Less Fumbling Inside Your Pumpkin

Because the puck is attached underneath the lid, basic light access happens at the top of the pumpkin instead of deep inside it.

Lift the lid. Access the light. Put the lid back.

Keep the Bottom of Your Pumpkin Open

Moving the light overhead frees up valuable space inside your jack-o’-lantern.

Use the bottom for:

Fog effects
Candy displays
Miniature scenes
Props
Food displays
Hanging effects
Open-bottom pumpkin designs
Creative Halloween installations

A Cleaner Look Through the Carving

With no puck sitting directly behind or beneath the carving, you see the illuminated jack-o’-lantern instead of the lighting hardware.

More Flexible Pumpkin Lighting

Because the light is attached to the lid, you don’t have to depend on the pumpkin having a perfectly flat interior surface to keep the puck positioned where you want it.

Not Just a Simple Jack-O'-Lantern Light

Moving the light to the top of the pumpkin opens up possibilities that are difficult or impossible with a traditional bottom-mounted pumpkin light.

Try using your Pumpkin Lid Light or Puck Mount for:

Fog-Filled Pumpkins

Keep the bottom clear for fog effects while the light shines through the mist from above.

Candy Displays

Fill the bottom of the pumpkin with candy while keeping the lighting overhead.

Pumpkin Dioramas

Create miniature graveyards, creatures, scenery and detailed displays inside the pumpkin.

Food Displays

Use an open-bottom or large-mouth pumpkin to illuminate cupcakes, appetizers, candy or other Halloween party displays.

Hanging Pumpkins

Create suspended jack-o’-lanterns with the light positioned at the top and the bottom left open.

Projection Effects

Use strategically carved openings to cast light and patterns onto surrounding surfaces.

Color-Changing Carvings

Use white, red, blue or green lighting to give the same carving completely different personalities.

View full details